Cold Rolled Mild Steel Sheet SPCC DC01 DC04 ST12 DDQ Material

Cold Rolled Mild Steel Sheet SPCC DC01 DC04 ST12 Carbon Steel Sheet DDQ Material Steel Strip

1 Thickness: 0.2-5.0mm

2 Width: 100-1010/1220/1250mm

3 Length as per customer's request.

4 Steel Grade:SPCC, SPCD, SPCE, DC01, DC02, DC03, SAE 1006.

Soft commercial quality, Full hard quality or Deep Drawing quality.

5 Packing: standard export packing.

DIN EN 10130 DC01 Steel (1.0330 Material) Data Sheet

DC01 steel (1.0330 material) is a European standard cold-rolled quality low-carbon steel flat product for cold forming. In BS and DIN EN 10130 standard, it contains 5 other steel grades: DC03 (1.0347), DC04 (1.0338), DC05 (1.0312), DC06 ( 1.0873) and DC07 (1.0898), the surface quality is divided into 2 types: DC01-A and DC01-B. In addition, this steel is also used under electrogalvanizing conditions. The designation of the steel is DC01+ZE (or 1.0330+ZE), and the standard is EN 10152.

DC01 Meaning and Definition

• D: (Drawing) flat products for cold forming
• C: Cold rolled
• DC01: Drawing quality
• DC03: Deep drawing quality;
• DC04, DC05: Special deepdrawing quality;
• DC06: Extra deepdrawing quality;
• DC07: Super deep drawing quality.

Examples of Steel Names

• DC01-A: Allow defects that do not affect formability or surface coating, such as pores, slight dents, small marks, slight scratches, and slight coloring.
• DC01-B: Better surfaces shall be free from defects that may affect the uniform appearance of high-quality paints or electrolytic coatings. The other surface should meet at least surface quality A.
• DC01+ZE: Electrolytically zinc coated
• DC01EK: Conventionally enamelled

DC01 Steel Data Sheet

The tables and lists below give grade DC01 steel data sheet and specification including chemical composition, mechanical properties, welding, etc.

Chemical Composition

DC01 steel chemical composition is listed in the following table based on ladle analysis.

Notes:

• EN 10130 – Cold rolled low carbon steel flat products;
• EN 10152 – Electrolytically zinc coated cold rolled steel flat products.
• EN 10139 – Cold rolled uncoated low carbon steel narrow strip.

DC01+ZE Steel Mechanical Properties

The table below lists DC01+ZE steel mechanical properties.

Notes:

• Yield strength: When the thickness is ≤0.7 mm but >0.5 mm, the yield strength value should be increased by 20 MPa. For thicknesses ≤0.5 mm, the value should be increased by 40 MPa.
• Elongation: When the thickness is ≤0.7 mm but >0.5 mm, the minimum value of elongation should be reduced by 2 units. For thicknesses ≤0.5 mm, the minimum value shall be reduced by 4 units.

Jiangsu Mittel Steel Industrial Limited is  located in Wuxi City,  a beautiful city near Shanghai.  Wuxi is close to  Shanghai (BAO STEEL) ,Zhangjiagang (ZPSS),Ningbo (BAO XIN),KUN SHAN (DKSS), enjoy excellent geographic location and convenient water, land and air transportation. , Wuxi become the biggest  stainless steel sheet ,plate and coil  supply Centers in China. Jiangsu Mittel Steel Industrial Limited was established in 1998 years. as one of the largest stockists and manufacturers of industrial grade Stainless Steel products and derivatives in Wuxi ,We keep a stock of 50000 tons every month, so we can delivery goods in fast time.

Our company supplies cold/hot-rolled stainless steel sheets,stainless steel coils and stainless steel Plate to many steel factories from athome and abroad, including Shanxi Taigang Iron& Steel CO, . Ltd (TISCO)Zhangjiagang Pohang (ZPSS), Shanghai BAO STEEL, Ningbo Baoxin and steel factories in Taiwan area, Mainland Chinese and foreign countries and regions. 

Our long-term business lines are 201.202.304(1.4301).304L.316.316L(1.4404).430.409L, 309S ,310S(1.4845).317L.904L.S31803(1.4462).S32750.S32760, Finish: 2B, BA, NO. 1 NO. 4, HL, 8K and so on...Meanwhile, our company is also engaged in the long-term supply of homemade & imported medium and thick plates, galvanized and carbon steel products. 

Adhering to the principle of "quality first and customer foremost",our company will offer long-term service to nationwide manufacturers of household appliances, elevators, tableware, ornaments, tanks and machines. We can offer precise frosted wiredrawing, 8K mirror finishing and skim board oil-abrasion of various specifications at any time. The precisely-processed products will meet your requirements for high quality. Our company is a modern enterprise integrating distribution and storage. 

If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.