Vehicle Access Control Gates 24V DC Motor Speed Adjustale Vehicle Barrier Gate

1. Parameters of Barrier Arm Type,Length and Operation Speed

3. Vehicle Barrier Gate Features

3.1 The running speed can be adjusted from 1.5s to 8s

3.2 Can be quickly interchanged

3.3 Open the barrier gate by motor wheel when power off ,automatically reset after power on

3.4 Curved crank arm three- link movement structure, the operation is stable

3.5 Wireless remote control control open/close

3.6 Auto reverse function(force adjustable)

3.7 Infrared photocells connector is available

3.8 Loop detector connector is available.

3.9 Well-integrated with car parking system equipment,with wire control(must be switch signal)

4. Technical parameters

4.1 Working temperature(motor): -35℃~+85℃

4.2 Rated voltage:DC24V

4.3 Running speed:1.5s-8s

4.4 Rated current:8.58A

4.5 Rated power:160W

4.6 No-load speed:1850rpm

4.7 Rated speed:1400rpm

4.8 Output Power:56.8N.m

4.9 Relative humidity:≤90%

4.10 Remote control distance:≤100M(in the open place)

4.11 IP Degree:IP44

4.12 Max length of arm:6M

5. Barrier arm balance adjustment

1,Please check and confirm arm status in horizon and vertical position,then

tighten 2pcs M12 screw.

2,According to arm balance status, repeat adjusting the spring level of tightness

of M8*140MM, make sure the arm open and close in stable.

3,For the barrier gate with double springs,please adjust the two springs simultaneously.

4,If arm open and close shake too much, Please check below picture. Open arm

shaking a lot means spring is too tight, loose a little. Close arm shaking too much means

spring too lose, repeat tighten a little spring.