Allen Bradley 1746-OX8 Slc 500 Output Module Brand New Authentic

1746-OX8 Performance Description Ethernet/IP adopts the same application layer protocol CIP as DeviceNet and ControlNet. Therefore, they use the same object library and consistent
Industry standards with good consistency.
Ethemet/IP uses standard Ethemet and TCP/IP technologies to transmit CIP communication packets, which is a universal and open application layer protocol
CIP, along with the widely used Ethernet and TCP/IP protocols, constitutes the architecture of the Ethernet/IP protocol. Kunrui001
1756-DHRIO Shanghai distributor
1746-OX8 Performance Description: The PLC requires an ambient temperature of 0-55 ℃. During installation, it should not be placed under components with high heat generation, and the surrounding ventilation and heat dissipation space should be large enough, basically single
There should be a spacing of more than 30mm between the element and the extension unit; There should be ventilation louvers on the upper and lower parts of the switchgear to prevent direct sunlight; If the surrounding environment exceeds 55 ℃, it is necessary to install
Install an electric fan for forced ventilation.?? 2. Humidity?? To ensure the insulation performance of the PLC, the relative humidity of the air should be less than 85% (without condensation).?? 3. Vibration?? Should make the PLC far away
Keep away from strong vibration sources and prevent frequent or continuous vibrations with frequencies ranging from 10 to 55 hz. When vibration is unavoidable in the operating environment, shock absorption measures must be taken, such as using shock absorption adhesive
Etc. 1746-OX8 Performance Description: Air should avoid corrosive and flammable gases such as hydrogen chloride, hydrogen sulfide, etc. For environments with high levels of dust or corrosive gases in the air, the PLC can be installed in a well enclosed control room or cabinet, and an air purification device can be installed.
The AMAX-2700 series is a module designed to expand digital output and input points for AMONet high-speed RS-485. Its high-speed, elastic, and cost-effective characteristics provide a rigorous solution for machine equipment manufacturers. There are four main digital input/output modules, including 32 point input, 32 point output, 16 point output/output, and 8 point output/input. With these modules, sensors/sensors can be directly connected to the module without the need for additional adapter boards. 1746-OX8 Performance Description: The serial length of output and input points can reach 100 meters. The AMONet high-speed RS-485 combines simple, wiring saving, and high-speed features. It can scan the 2048 output and input channels in 1.04 milliseconds. The integrated pluggable wiring terminal module design also makes installation and maintenance tasks for engineers more time-saving.