PVC self-adhesive film roll, waterproof wall sticker for car body and car decoration

PVC self-adhesive film roll, waterproof wall sticker for car body and car decoration

Our product character

Strong adhesion
Waterproof and anti-fog
Not easy to break
High strength
Safe and environmentally friendly
Good quality

Features	Test Method	Results
Caliper, face film	GB/T6672-2001	100±10micron (μm)
liner	GB/T4669-1995	120±5g/m²
Dimensional stability	FINAT-14	Max. 0.8 mm
Adhesion, initial(175*25mm)	FINAT FTM-1, stainless steel	≥10N
Adhesion, Ultimate(175*25mm)	FINAT FTM-1, stainless steel	>=11N
Release	FINAT-4	15-25g/inch
Shelf life	Stored at 24° C/50-60 % RH	12Months
Durability	Vertical exposure	12Months

Applications

1.Anti-counterfeiting mark

2.Point-of-purchase signs

3.Advertising lettering Car stickers

Advantages

1.Rich hallucinatory dynamic effects

2.When viewed from different angles, it can show brilliant and colorful colors

3.Low residue in short term

4.Good dimensional stability after application

Shelf Life, Shipping, and Storage

1.All DPI products should be stored in original packaging with original protective materials. It is recommended to keep them sealed and placed

horizontally. Stacking height should not exceed 6 layers, avoiding direct sunlight and heat source After contact. Storage temperature 25±5ºC,

relative humidity 50±15%. In this case, the shelf life of the product is 12 months.

2.Ship the finished graphic lying flat or in a roll. To roll the graphic, roll it film side out onto a core that is 3 inches or larger in diameter. These

methods help prevent the film and application tape from wrinkling or popping off the liner.

Thermal

Construction temperature: 20°±10ºC

Temperature range: -20°+60° C

Chemical

Resistant to most petroleum based oils, greases and aliphatic solvents

Resistant to most mild acids, alkalies, and salts

Warranty

The materials are manufactured under careful quality control and are warranted to be free from defect in material and workmanship. Any material shown to our satisfaction to be defective at the time of sale will be replaced without charge. Our aggregate liability to the purchaser shall in no circumstances exceed the cost of the defective materials supplied. No salesman, representative or agent is authorized to give guarantee, warranty,or make any representation contrary to the foregoing.

Important Remarks

All DPI material instructions, technical information and application recommendations are based on what we consider to be reliable typicality test results, for special countries environment or special application, you can contact with our technical department to develop corresponding products to meet customer needs.

Other Products

Our customer inquiy case:

Weifang Bright Master Importing and Exporting Co.,Ltd is located in Weifang, the beautiful kite capital.

Our company products

1.Pe stretch film

2.Customized printing bopp tape

 

3.Metalized vmpet+PE for thermal insulation Material​

4.Silver/gold paper and metalized black film with embossed for cake tray 

5.Clear bopp double heat seal bopp packaging film

6.Customized green al/pet (inside printing) for packaging 

PETG Shrink Film 

At the same time, we accept customized some adhesive products and thermal insulation film etc.

Our company's products are now widely used in various packaging, building materials, agriculture, life and other aspects.

Pls do not worry we are manufacturer or trader,we only earn what we deserve ,but do well and do long business with you.Trust me our price and service absolutely will do not let you down.

Our restaurant