iec60335 2 14 blender probe

Brand Name:HongCe

Model Number:HT-I02B

Place of Origin:China

IEC60335-2-14 Test Probe With Diameter 125mm Circular Stop Face, Probe Length 100mm Standard of Test Finger Probe: IEC61032 figure 2 test probe B, IEC60335-2-14 clause 20.2. Application of Test Finger Probe: This probe is intended to verify the stability and mechanical hazards of blenders. Test sample of Test Finger Probe: Blenders. Feature of Test Finger Probe: A test probe similar to that of test probe...

Brand Name:KingPo

Place of Origin:China

...Probe B Finger Length 100mm IEC60335 2 14 Clause 20.2 IEC60335-2-14 Clause 20.2. Test Finger B Product Details Standard description: For blenders, detachable parts, except lids, are not removed. The test is carried out with a test probe similar to that of test probe...

Brand Name:Sinuo

Model Number:SN2210-25

Place of Origin:China

IEC60335-2-14 Hand-held blenders φ40 mm Cylinder Rod Test Probe Standard and Application: The φ40mm cylinder rod meets the standard requirements of IEC 60335-2-14 Clause 20.103. It is used to verify the hand-held blenders other than hand-held food mixers provided with a blender...

Brand Name:kerang

Model Number:HT-I33

Place of Origin:CHINA

...Probe HT-I33 Standard:IEC60335-2-14. Application:The stirrer shall incorporate a biased-off switch that is recessed or guarded to prevent accidental operation. Test sample:Hand held blender. Feature:Appliance is checked by applying a cylindrical rod whose diameter is 40mm and which has a hemispherical end to touch the switch with a force not exceed 5N, the appliance shall not operated. Parameters: Model HT-I33 Probe diameter Φ40mm Probe

Brand Name:JLX

Model Number:LX-8001

Place of Origin:Made in China

IEC60335-2-14 8mm Test Rod Technical parameters: Diameter of the probe: 8 mm Probe materials: Stainless steel Handle: Nylon 20.102 Blades of hand-held blenders shall be completely screened from above and shall not be able to touch a flat surface while ...

Brand Name:kingpo

Model Number:IEC60335-2-24-cl.20

Place of Origin:china

...-2-14|EN60335-2-14|GB4706.30 IEC60335-2-14|EN60335-2-14 Appliance: This test probe similar to that of test probe B of IEC 61032 but having a circular stop face with a diameter of 125 mm instead of the non-circular face, the distance between the tip of the

Brand Name:HeJin

Model Number:HT-I02B

Place of Origin:China

...Probe With 125mm Diameter Stop Face Standard: IEC 60335-2-14 Household and similar electrical appliances – Safety – Part 2-14: Particular requirements for kitchen machines clause 20.2; IEC 61032 Protection of persons and equipment by enclosures – Probes for verification. Application: It is used to test stability and mechanical hazards for blenders, detachable parts. The test is carried out with a test probe

Brand Name:PEGO

Model Number:PG-TPB

Place of Origin:China

IEC61032 Test Probe B / Jointed Test Finger IEC60335-2-14 with Diameter 125 Stop 1. Introduction Jointed test finger (test probe B) is consisted dactylogryposis and handle, the dactylogrypossis has two active joints that can bend in 90 degrees and made by ...