600 cone degree penetration tester

Brand Name:Shengtai Instrument

Model Number:SH017

Place of Origin:CHINA

...Cone/Needle Penetration Tester SH017 SH017 Automatic Constant Temperature cone/needle penetration Tester is designed and manufactured according to the technical requirements and relevant regulations of GB/T269 ASTM D217 and GB/T4509 ASTM D5 standards It is mainly suitable for testing the cone penetration...

Brand Name:ZL

Model Number:ZL-2406

Place of Origin:China

...penetration of steel cones falling from a fixed height. It characterizes the degree of damage to the geotextiles caused by sharp stones falling on the surface of the geotextiles. Its performance conforms to the national standard GB/T17630 Requirements of

Brand Name:Skyline

Model Number:SL-F61

Place of Origin:China

AATCC 42 Fabric Impact Penetration Tester Introduction: The impact penetration tester is used to determine the anti-permeability of fabrics under low impact conditions according to the standard AATCC42, and can be used to predict the anti-rain penetration ...

Brand Name:GESTER

Model Number:GT-C33

Place of Origin:China

AATCC 42 Fabric Water Impact Penetration Tester Product Introduction Application: This tester is applicable to any textile fabric, which may or may not have been given a water resistant or water-repellent finish.It measures the resistance of fabrics to ...

Brand Name:SAMYON

Model Number:GYS-2

Place of Origin:CN

... report 4 Penetration depth Optical projection display 5 Power 220V±10% 50Hz The Photoelectric Liquid and Plastic Limit Tester is used to determine moisture content of upper limit of fine grain soil (liquid limit) and lower limit (plastic limit). The

Brand Name:REFOND

Model Number:RF4418A

Place of Origin:Shen Zhen, China (Mainland)

REFOND Fabric Testing Equipment Impact Penetration Tester AATCC 42 Standards AATCC 42 GB/T 33732 GB/T 24218 YY/T 1632 YY/T 1499 ISO 18695 Product Instruction Water Impact Penetration Tester is used to determine the water resistance of fabrics under low ...

Brand Name:lixian

Model Number:HZ-8004

Place of Origin:China

... height of cone penetration ability, characterized Chienshih drop in the surface of geotextile geotextile damage on the degree of the level of the geotextile specimen clamping In the clamping ring, so that provided a high quality cone 500mm drop from the

Place of Origin:china

Model Number:QG-15

... installation without the use of tools. QG 15 full cone spray nozzle with narrow angle 15 degree,Q G 30 full cone spray nozzle with narrow angle 30 degree COMMON APPLICATION Cleaning and washing of products requiring deep penetration and/or spray induced

Brand Name:Infinity Machine

Model Number:IC1362

Place of Origin:Made In China

Wire 45°Cone Pull Test Machine Model: IC1362 Application: Suitable for all kinds of small electronic products charging power cable, earphone wire, small multi-core wire for oblique 45 degree rotating life test. Features: 1. Dual station design, independent...

Brand Name:Btutest

Model Number:BTU-MCM

Place of Origin:Made in China

... known as consistency). The consistency of the mortar is expressed in centimeters of the degree of sinking of the standard cone of a certain geometry and weight at its own weight which is free to sink into the mortar mixture.Cement Testing Equipment The

Brand Name:Gaoxin

Model Number:GX-5029-A

Place of Origin:China

...Tester Product Name: Dyed fabric/leather crock meter Produce model: GX-5029-A Design criteria: ISO-105, ASTM-D2054, AATCC-8, JIS-L0849, JIS-L0862 Product Description: This machine is used to determine the degree of discoloration of dyed fabrics or leathers after rubbing. Test method: Dry or wet white cotton cloth is used to wrap the friction cone...

Brand Name:YUAN

Model Number:W31Y-60

Place of Origin:China

...600*10 Steel Pipe Straightening Machine This Machine With Easy And Compact Structure, Convenient And Reliable. The Time Of Putting Steel Pole To Penetrator Can Be Fit By Workers. The Workers Hold The Press-Button Press Molding, The Linearity Was Fit By Eyes Of The Workers, It Is With High Efficiency. Feature: ■W31Y-pipe straightening machine using hydraulic-driven,widely used in various steel pipes and light pole,such as Drive-and cone...

Brand Name:Haida

Model Number:HD-M014

Place of Origin:China

...Tester with Heater and Thermostat Aluminum Block Test Specimens Introduction Estimated Packaging Dimensions: (W*D*H) 900*600*750mm Power supply source: single-phase, 220V±10%, 50/60Hz (can be appointed) Estimated Gross Weight: 80kg Specifications Suit for standard: CEN/TS 12983-2: 2005 Annex D & BS EN 12983 Annex M Diameter of the block = 220 mm + 5, -2 mm Resolution of the thermo controller is +/- 2 degree

Brand Name:CCWY

Model Number:CCWY

Place of Origin:CN

...tester For Ultrasonic Transducer / Ceramics measuring Frequency Range: 1KHZ-1MHz Min.Frequency Step: 0.1HZ Measurement accuracy: < 0.5% Measurement speed: five seconds per pieces(equivalent to 600 scan dots) Frequency accuracy: ±5ppm Phase Accuracy: 0.15 degree...

Brand Name:SLET

Place of Origin:China Jinan

Model Number:600L

600L beer stainless fermentation tank Fermentation tanks Design pressure 3 bar, working 2 bar 3 stainless steel legs with leveling footpads, the leg is adjustable Interior shell: 304 stainless steel, thickness 2mm (11 gauge) Exterior shell: 304 stainless ...

Brand Name:Great Win

Model Number:GW-107

Place of Origin:China

...degree ) of various fabric surface with or without water resistant or water repellent finishing. Detection Standard: YY0469-2011 Medical Surgical Mask Medical surgical mask synthetic blood penetration tester The synthetic blood penetration test for surgical masks can output a test ...

Brand Name:Sinuo

Model Number:SN2210-14

Place of Origin:China

IEC 61032 Figure 14 Test Probe 31 Product Overview: This probe conforms to the standard requirements of IEC 61032 test probe 31 figure 14, etc. This probe is intended to verify the protection against access to hazardous mechanical parts of the grinding sys...

Brand Name:GMC

Place of Origin:China

...Height (m) Remarks 1 TCGZ018×1C 4.3 2.795 1833 3.520 1. Capacity is based on Density:0.65t/m3; 2. Bottom cone degree:600 3. Roof cone degree: 250 4.Other parameter offered upon request 2 TCGZ018×2C 6.67 4.3355 1833 4.400 3 TCGZ018×3C 8.99 5.8435 1833 5....

Brand Name:YODA

Model Number:Y185LSM-A01

Place of Origin:Guangdong

...degrees (up and down)/178 degrees (left/right). 2. 5mm tempered glass protection screen. 3. Operating temperature can be controlled at -20°C~+50°C. 4. Induction mode is dynamic induction. 5. ​The degrees cone Angle at 35 degrees Angle. 6. The product size is 600*800mm. 7. Display quality ranges

Brand Name:Tianying

Model Number:IADC725

Place of Origin:Hunan CHINA

... - Journal angle determines the overall aggressiveness of the bottom hole profile. Soft formation rock bits employ a 33 degree angle while hard formation rock bits employ a 36 degree angle. Cone Offset - Increased rate of penetration (ROP) can be achieved