Home > Security & Protection > Access Control Systems & Products > Fingerprint Scanner >

Iec60335 2 14 Blender Probe

1-10 Results for

iec60335 2 14 blender probe

from 8 Products

IEC60335-2-14 Test finger Probe With Diameter 125mm Circular Stop Face Probe Length 100mm

IEC60335-2-14 Test Probe With Diameter 125mm Circular Stop Face, Probe Length 100mm Standard of Test Finger Probe: IEC61032 figure 2 test probe B, IEC60335-2-14 clause 20.2. Application of Test Finger Probe: This probe is intended to verify the stability and mechanical hazards of blenders. Test sample of Test Finger Probe: Blenders. Feature of Test Finger Probe: A test probe similar to that of test probe......

Guangzhou HongCe Equipment Co., Ltd.

Address: No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou

Standard Test Probe B Finger Length 100mm IEC60335 2 14 Clause 20.2

...Probe B Finger Length 100mm IEC60335 2 14 Clause 20.2 IEC60335-2-14 Clause 20.2. Test Finger B Product Details Standard description: For blenders, detachable parts, except lids, are not removed. The test is carried out with a test probe similar to that of test probe......

Dongguan Kingpo Technology Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

φ40 Mm Cylinder Rod Test Probe With Hemispherical End IEC60335-2-14

IEC60335-2-14 Hand-held blenders φ40 mm Cylinder Rod Test Probe Standard and Application: The φ40mm cylinder rod meets the standard requirements of IEC 60335-2-14 Clause 20.103. It is used to verify the hand-held blenders other than hand-held food mixers provided with a blender......

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

IEC60335-2-14 Stainless steel Test Finger Probe HT-I33

...Probe HT-I33 Standard:IEC60335-2-14. Application:The stirrer shall incorporate a biased-off switch that is recessed or guarded to prevent accidental operation. Test sample:Hand held blender. Feature:Appliance is checked by applying a cylindrical rod whose diameter is 40mm and which has a hemispherical end to touch the switch with a force not exceed 5N, the appliance shall not operated. Parameters: Model HT-I33 Probe diameter Φ40mm Probe...

shanghai kerang technology co ltd

Address: Zone C, 2 / F, building 3, 69 Huafang Road, Qingpu District, Shanghai, China

8,0 mm Test Rod of IEC60335-2-14

IEC60335-2-14 8mm Test Rod Technical parameters: Diameter of the probe: 8 mm Probe materials: Stainless steel Handle: Nylon 20.102 Blades of hand-held blenders shall be completely screened from above and shall not be able to touch a flat surface while ......

HK LEE HING INDUSTRY CO., LIMITED

Address: 7F Junfeng Building, Gongle, Xixiang, Baoan District, Shenzhen, Guangdong, China

IEC 60335-2-14 Test Probe B Of IEC 61032 With Circular Stop Face With A Diameter Of 125 Mm

...-2-14|EN60335-2-14|GB4706.30 IEC60335-2-14|EN60335-2-14 Appliance: This test probe similar to that of test probe B of IEC 61032 but having a circular stop face with a diameter of 125 mm instead of the non-circular face, the distance between the tip of the...

KingPo Technology Development Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

IEC60335-2-14 Household Appliance Test Equipment Probe With 125mm Diameter Stop Face

...Probe With 125mm Diameter Stop Face Standard: IEC 60335-2-14 Household and similar electrical appliances – Safety – Part 2-14: Particular requirements for kitchen machines clause 20.2; IEC 61032 Protection of persons and equipment by enclosures – Probes for verification. Application: It is used to test stability and mechanical hazards for blenders, detachable parts. The test is carried out with a test probe...

HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

Address: No.6-36, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou, Guangdong, China

Jointed Test Finger Probe New Condition IEC60335-2-14 With Diameter 125 Stop

IEC61032 Test Probe B / Jointed Test Finger IEC60335-2-14 with Diameter 125 Stop 1. Introduction Jointed test finger (test probe B) is consisted dactylogryposis and handle, the dactylogrypossis has two active joints that can bend in 90 degrees and made by ......

Pego Electronics (Yi Chun) Company Limited

Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China

Submit your “iec60335 2 14 blender probe” inquiry in a minute :

*From:	Your email address is incorrect!
To:	Pego Electronics (Yi Chun) Company Limited Products: Jointed Test Finger Probe New Condition IEC60335-2-14 With Diameter 125 Stop
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “iec60335 2 14 blender probe” inquiry

*From:
Your email address is incorrect!
To: Guangzhou HongCe Equipment Co., Ltd.
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

Inquiry Cart 0