850nm Mechanical Fiber Optic Switch , 2x2 Optical Switch Low Insertion Loss
|
Fiber Optic Switch 2x2 Mechanical Optical Switch The 2x2 optical switch is connected to the optical path by connecting or blocking the optical signal, the product is controlling by electrical signal to switch the optical path, the excellent design makes the product have the advantages of high stability, high reliability, low loss and low cost, which are widely used in the switching and protection of optical......
Shenzhen Jiangfan Communication Equipment Co., Ltd.
|
High Reliability Stability 2x2 Channels Fiber Optic Switch Opto Mechanical
|
...Optical Switch High Reliability Stability 2x2 Channels Bypass Opto-Mechanical Optical Switches 2X2B Opto-Mechanial Optical Switch The 2x2B Opto-Mechanical Bi-directional Fiber Optic Switch connects optical channels by redirecting 2 incoming optical signals into 2 output fibers. This is achieved using a opto-mechanical configuration and activated via an electrical control signal. The switch......
Gezhi Photonics (Shenzhen) Technology Co., Ltd.
|
2x2 Bypass Mechanical Fiber Optic Switch 1310 / 1550nm Latching OXC system
|
2x2 Bypass Mechanical Fiber Optic Switch 1310 / 1550nm Latching OXC system GEZHI Phothonics 2x2 Bypass Mechanical Fiber Optic Switch (2X2B Optical Switch) connects optical channels by redirecting an incoming optical signal into a selected output fiber. All GEZHI Photonics’ 2x2 Bypass Mechanical Fiber Optic Switch (2X2B Optical Switch) support all wavelength at 1260nm~1650nm, it offers ultra-high reliability, low insertion loss, fast switching...
Gezhi Photonics Co.,Ltd
|
2x2 Bypass Mechanical Fiber Optic Switch 1310/1550nm for Optical network protection
|
2x2 Bypass Mechanical Fiber Optic Switch 1310/1550nm for Optical network protection 2x2 Mechanical Optical Switch is not affected by the polarization and wavelength. It supports all wavelength at 850nm and 1260nm~1650nm, and It provides high reliability, low insertion loss, fast switching......
Shenzhen Unifiber Technology Co.,Ltd
|
Non Latching 500MW 1550nm 2x2 Bypass Fiber Optic Switch
|
...Fiber Optic Switch bypass with board PCB Board Hilink 2x2 Fiber Optic bypass switch module packing in a Metal case available for high operating temperature. Its comes with 1310&1550nm singlemode Non-Latching type SC/APC pigtailed. 2x2 Bypass Fiberoptic Switch connects optical channels by redirecting an incoming optical signal into a selected output fiber......
Shenzhen HiLink Technology Co.,Ltd.
|
Mechanical Fiber Optical Switch SM 1310nm 1550nm 1m 900um 1x1 1x2 2x2
|
...Optical Switch SM 1310/1550nm 1m 900um FC/APC Description 1xN mechanical fiber optic switch manufactured by ANC International Co., Limited connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. The mechanical operation offers ultra-high reliability and fast switching......
ANC International Co., Limited
|
UPC Polish SMF Non Latching Full 2x2 Fiber Optical Switches
|
...2x2 Optical Switches Iis through and Cross optical state. Its used in Channel Blocking, Configuration add/drop solution with low optical distortions and high reliability. The optical path through the units is purely optical; i.e. there is no optical to electrical to optical conversion. There is no electrical loss or electrical bandwidth limit on the fiber optic path. The optical path will redirecting an incoming optical......
Shenzhen linkopto Technology Co. Ltd
|
1x2 Mechanical OSW Fiber Optic Switch For System Monitoring
|
...Fiber Optic Switch Introduction Olycom's 1x2 Mechanical Fiber Opitc switch is used to turn on and turn off optical signal. The 1x2 Mechanical Fiber Optic Switch is based on Advanced Optoelectronic Integrated Technology. With the development of optical communication, Optical Switch device is the key to a new generation of all-optical......
Shenzhen Olycom Technology Co., Ltd.
|
Optical switch, 2x2, bypass type, 5V operating voltage, 1260~1620, latching type, FC/PC connector.
|
... an ideal Component for OADM, OXC, system monitoring and error protection. It could be easy to integrate into a high-density optical communication system. Features Structure: 4 ports Insertion loss : ≤ 0.8dB Control type: latching type High return loss:...
David fiber device Ltd
|
120km Transmission Network Fiber Optic Switch With -40°C To +85°C Operating Temperature
|
...Fiber Optic Switch is an advanced optical network switch that provides reliable and stable transmission of high data rate signals over optical fiber. It is designed to meet the stringent requirements of next-generation fiber-optic networks. With a maximum data rate of 10/100/1000/10000 Mbps, the Fiber Optic Switch......
Shenzhen Optfocus Technology Co., Ltd.
|
Submit your “fiber optic switch 2x2” inquiry in a minute :