Forged D3 Round Bar 300mm Annealing Cold Work Tool Steel
|
...D3 Cold Work Tool Steel Round Bar In 300mm Diameter Annealing D3 / Cr12 / 1.2080 steel is widely used cold working die steel, with high strength, good hardenability and good wear resistance, but the impact toughness is poor characteristics. Applicaiton: D3 / Cr12 / 1.2080 steel is widely used cold working die steel, with high strength, good hardenability and good wear resistance, but poor impact toughness.It is mainly used for cold...
DONGGUAN MISUNG MOULD STEEL CO.,LTD
|
D3 Special Cold Work Tool Steel Round Bar Hot Rolled Annealed Diameter 10 - 180mm
|
D3 Special Hot Rolled Annealed Cold Work Tool Steel Round Bar Equivalent grades GB DIN AISI JIS Cr12 1.2080 D3 SKD1 Chemical Composition(%) C Si Mn Cr Mo Ni Cu P S 2.0-2.3 0.15-0.35 0.15-0.45 11.5-13.0 0.15-0.25 0.40-0.70 ≤0.03 ≤0.03 ≤0.03 D3 cold work tool steel......
Guangzhou Changfeng Steel Co., LTD
|
Forged Cold Work Tool Steel GB Cr12 JIS SKD1 DIN 1.2080 ASTM D3
|
... JIS SKD1, is a 12% chrome alloy steel. D3 cold work steelhas very high wear resistance against abrasive and adhesive wear due to the high volume of hard carbides in the steel matrix, medium toughness, dimensionally stable, high compressive strength, not...
Evergrowing Resources Co., Ltd.
|
Wear Resistant Cold Work Tool Steel Plate High Speed Steel Plate
|
...Cold Work Tool Steel Plate Tool steel is the steel used to manufacture cutting tools, measuring tools, molds and wear-resistant tools. Tool steel has high hardness and can maintain high hardness and red hardness at high temperature,as well as high wear resistance and appropriate toughness. Tool steel is generally divided into carbon tool steel,alloy tool steel and high-speed tool steel......
Jiangsu Join Industrial Co., Ltd.
|
Cold Work Tool Steel Bar / Rod AISI A2 / DIN EN X100CrMoV5 1.2363 High Strength
|
... hardening chromium alloy tool steel that replaces O1 tool steel when safer hardening, less distortion and increased wear resistance are required. AISI type A2 steel is intermediate in wear resistance between O1 oil-hardening tool steel and D2 high-carbon,...
SHANGHAI UNITE STEEL
|
Cold Work Tool Alloy Steel Seamless Pipes NC6 NC10 NC11 X210Cr12 1.2080 High Strength
|
..., pneumatic chisels, punches, cutters, dies for cold, form into bending, straightening rolls, etc. Technical specifications: PN EN Werkstoff nr AISI NC6 NC10 NC11 X210Cr12 1.2080 D3 NC11LV X153CrMoV12 1.2379 D2 NMV 90MnCrV8 1.2842 O2 NZ3 60WCrV8 1...
BEST PIPELINE EQUIPMENT CO.,LTD
|
Cold Rolled Tool Steel Bar High Pressure Steel Pipe Aisi A4
|
... HRc. AISI A4 steel Annealing delivery hardenss less than 250HB. Chemical composition C(％) 0.95～1.05 Si(％) 0.10～0.50 Mn(％) 1.80～2.20 P(％) ≤0.030 S(％) ≤0.......
Gnee Steel (tianjin) Co., Ltd.
|
AISI H11 Hot Work Tool Steel For Hot Working Mold Steel Flat steel block
|
...Work Tool Steel Manufacturer For Hot Working Mold Steel H11 steel is one of the three most commonly used hot work die steel, the carbide in the steel is small, uniform distribution.Good cold and hot fatigue resistance and corrosion resistance, good hot and cold workability, good hardenability. In the medium temperature has a thick thermal strength, oxidation resistance, high toughness and wear resistance. Tool Steel......
Zhangjiagang Guangda Special Material Co., Ltd.
|
Aisi D3 Tool Steel Bar Suppliers Din 1.2080 X210cr12 Steel DIN EN X210Cr12 BS X210Cr12 AISI SAE
|
...Steel Bar DIN/EN X210Cr12 BS X210Cr12 AISI/SAE D3 D3 is the cold work die steel with the most superior abrasiveness. The heat treatment effect is stable. Steel for deep drawing dies cold forging dies..... Resistance welding electrode: chromium-zirconium copper guarantees performance by combining heat treatment and cold working, and it can obtain the best mechanical and physical properties. High carbon, high chromium type Leystenite cold work...
Wuxi Zhanlu International Trade Co., Ltd
|
low price hot rolled alloy tool steel round bar 1,2080 D3 for small orders
|
...tool steel round bar 1,2080 D3 for small orders Alloy Tool Steel Bar D3 Details Material:D3 steel round bar Relevant: D2, D3 Technique: forging,hot rolled, cold draw Surface: black, turned and ground,bright Diameter: 20 to 500mm Length: 2000 to 13000mm or customized Process: EAF + LF + VD + forged + heat treatment (annealed, normalized, Q+T)) Chemical Composition D3......
Tianjin J&H Steel Trading Co.,Ltd
|
Submit your “300mm d3 cold work tool steel” inquiry in a minute :