220V 50Hz Ф0.9mm Needle Flame Test Apparatus Flowmeter Adjustment
|
...a Ф0.9mm needle-shaped burner that tilts with the angel of 45°and provide it with butane gas. The fire hazard of the equipment when there is flammule inside the equipment that ......
Dongguan Kingpo Technology Limited
|
Laboratory Flammability Testing Equipment , IEC60695-11-5 Needle Flame Test Apparatus
|
Laboratory Testing Equipment IEC60695-11-5 Needle Flame Test Chamber Product information: The Needle Flame Tester consists of a Ф0.9mm needle-shaped burner that tilts with the angel of 45°and provide it with butane gas. The fire hazard of the equipment whe......
Guangzhou HongCe Equipment Co., Ltd.
|
VW-1 Flame Test Vertical Flame And FT1 Test UL 1581
|
...flame test combustion test. It is applicable to VW-1 of ul1581, UL13, ul444 and ul1655 and FT-1 and ft-2 of CSA. And a large number of wires and cables are widely used in the industry. 2, Design principle: The whole test was carried out in a sealed laboratory with a volume of 4.......
KingPo Technology Development Limited
|
Plastic Burn Needle Flame Test Apparatus Electrical Industry , Chemistry Flame Test Chamber
|
... the safety of the operator. The Needle Flame Tester consists of a diameter of 0.9mm needle burner that tilts to 45degree from the vertical and is fueled with butane gas. The test time for the temperature of the standard copper block to increase from...
Suzhou Yangyi Vouch Testing technology Co.,Ltd
|
Professional Fire Test Chamber , Laboratory Spread Flame Test Apparatus
|
... specimen. Following ignition, any flame front which develops is noted and a record is made of the progression of the flame front horizontally along the length of the specimen in terms of the time it takes to travel to various distances. The results are...
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
ISO 5658-2 Fire Flammability Resistance Testing Equipment / Laboratory Spread Flame Test Machine
|
... a test specimen. - Following ignition, any flame front which develops is noted and a record is made of the progression of the flame front horizontally along the length of the specimen in terms of the time it takes to travel to various distances. - The...
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
Laboratory UL94 Flame Test Apparatus Combustion Chamber Tester For Plastic
|
...flammability of materials used in electrical and electronic devices. It is designed to simulate the conditions of a small flame ignition source that may occur in these devices. The machine consists of a combustion chamber with a burner at the bottom, a...
Guangdong Guangce Instrument Technology Co., Ltd
|
Needle - Flame Testing Method Flammability Test Chamber Small Flame Effect Fire Hazad Test IEC 60695-11-5
|
... electrical equipment. The burner which produces the 12 mm high test flame shall consist of a tube at least 35 mm long with a bore of 0.5mm±0.1mm and outer diameter not exceeding 0.9mm. The burner is supplied with butane or propane gas having a...
Sinuo Testing Equipment Co. , Limited
|
45 Degree Tilted Needle Flame Test Apparatus Fire Hazard Protection Testing Equipment IEC60695
|
... hazard of the specimen is assessed by measuring the burning duration of the specimen, and any ignition of the wrapping tissue and white pine board below the specimen. Needle flame tester is...
Pego Electronics (Yi Chun) Company Limited
|
Needle Flammability Test Equipment , Needle Burner Flame Test Equipment
|
...Test Equipment , Needle Burner Flame Test Equipment The needle-flame test is a simulation test item specified in IEC 6 0695-2-2: 1991 (2nd edition), IEC 6 0695-2-2 No. 1 (1994-03). Needle flame test is the use of the needle size burner (Φ0.9mm), through a specific gas (butane or propane), the 45 ° angle to the direction of timing test products, test......
Guangzhou Kinte Electric Industrial Co.,Ltd
|
Submit your “0 9mm flame test laboratory” inquiry in a minute :