OEM High grade Dustproof Entrance Turnstile Door for access control
- Thick of steel:1.5mm
- Material: 304stainless steel
- Rod length:510mm
- Design and size can be customized
The shape like a butterfly Overall plate structure, the box
materials using standard 304 stainless steel, Bridge Arc structure,bottom is equipped with the base during the casing within a
professional guide tank. Can be installed in indoor, outdoor with
shed, applicable to restrict the passing rate of the place, has the
count, attendance, current limiting function.
1. Stainless steel box, box-type bevel shape, novel and beautiful,
2. Waterproof, sunscreen, anti-temperature, anti-cold.
3. Access Prompt function: Red and green light prompt the passing
4. The programmable gates control state, with a variety of
operating modes you can choose, you can set a
one-way or two-way control
5. Compatible IC, ID, magnetic card, bar code card, and other
6. Power failure emergency function after power channel
automatically open, closed automatically after
power-on, to meet the special needs of the user and the fire safety
7. The control panel with counting function, LED digital display
8. The standard input and output interface, is the best choice for
9. Sound, light alarm function: with trespassing, trailing alarm
10. Scour protection function ,when the gate signal is not
received, the stick is automatically locked
11. Fault detection and alarm function, user-friendly maintenance
TDZ-S335 Tripod Turnstile Details
Q:On power,but turnstile gates take no action
1)Q: Zero light of the control board and the power indicator light turns
red,normal, but motor does not move
A.Detecting the motor terminals MA, MB at both ends if there is
voltage output (DC24V).
If there is output, detect whether electrical connection is sealed
off or not;Check whether motor are
damaged or not,red and black wire of the motor connected directly
B.If the above checks are normal,movement may exist stuck
state,first access red and black cable of
motor to battery,let the arm back to zero,then recovery the red and
black wire of motor,with a manual switch test.
If arm will have action,but not smooth,it means movement has hit
damage,should repair movement.
2) Zero position of control board indicator and power indicator turn
is light in left in place or right in place,
shows zero limit board has problem,need to change zero limit board.
Welcome to our website and hope our best products and services will
satisfy you! Thanks a lot for your visiting!