Micro Deformation Cold Work Tool Steel Bar 1.2510 / SKS3/O1 For Mould & Tool
...Cold Work Tool Steel Bar 1.2510 / SKS3/O1 For Mould & Tool 1. Availability and hardness Soft annealed, hardness ≤ 230HBS. 2. Typical chemical composition (mass fraction,%) C Si Mn Cr W P S V 0.90-1.05 0.15-0.35 1.00-1.20 0.50-0.70 0.50-0.70 ≤0.035 ≤0.035 0.05-0.15 3. 1.2510 tool steel's characteristics: German micro-deformation of wear-resistant steel, the steel is manganese, chromium, tungsten alloy steel......
Guangzhou Changfeng Steel Co., LTD
|
Cold Work Tool Steel Bar / Rod AISI A2 / DIN EN X100CrMoV5 1.2363 High Strength
... hardening chromium alloy tool steel that replaces O1 tool steel when safer hardening, less distortion and increased wear resistance are required. AISI type A2 steel is intermediate in wear resistance between O1 oil-hardening tool steel and D2 high-carbon,...
SHANGHAI UNITE STEEL
|
Forged D3 Round Bar 300mm Annealing Cold Work Tool Steel
...Cold Work Tool Steel Round Bar In 300mm Diameter Annealing D3 / Cr12 / 1.2080 steel is widely used cold working die steel, with high strength, good hardenability and good wear resistance, but the impact toughness is poor characteristics. Applicaiton: D3 / Cr12 / 1.2080 steel is widely used cold working die steel, with high strength, good hardenability and good wear resistance, but poor impact toughness.It is mainly used for cold...
DONGGUAN MISUNG MOULD STEEL CO.,LTD
|
Cold Rolled Tool Steel Bar High Pressure Steel Pipe Aisi A4
... HRc. AISI A4 steel Annealing delivery hardenss less than 250HB. Chemical composition C(%) 0.95~1.05 Si(%) 0.10~0.50 Mn(%) 1.80~2.20 P(%) ≤0.030 S(%) ≤0.......
Gnee (Tianjin) Multinational Trade Co., Ltd.
|
Forged Cold Work Tool Steel GB Cr12 JIS SKD1 DIN 1.2080 ASTM D3
... JIS SKD1, is a 12% chrome alloy steel. D3 cold work steelhas very high wear resistance against abrasive and adhesive wear due to the high volume of hard carbides in the steel matrix, medium toughness, dimensionally stable, high compressive strength, not...
Evergrowing Resources Co., Ltd.
|
Aisi D3 Tool Steel Bar Suppliers Din 1.2080 X210cr12 Steel DIN EN X210Cr12 BS X210Cr12 AISI SAE
...Steel Bar DIN/EN X210Cr12 BS X210Cr12 AISI/SAE D3 D3 is the cold work die steel with the most superior abrasiveness. The heat treatment effect is stable. Steel for deep drawing dies cold forging dies..... Resistance welding electrode: chromium-zirconium copper guarantees performance by combining heat treatment and cold working, and it can obtain the best mechanical and physical properties. High carbon, high chromium type Leystenite cold work...
Wuxi Zhanlu International Trade Co., Ltd
|
Cold Work Tool Alloy Steel Seamless Pipes NC6 NC10 NC11 X210Cr12 1.2080 High Strength
... chisels, punches, cutters, dies for cold, form into bending, straightening rolls, etc. Technical specifications: PN EN Werkstoff nr AISI NC6 NC10 NC11 X210Cr12 1.......
BEST PIPELINE EQUIPMENT CO.,LTD
|
SUS304 316 Cold Rolled Stainless Steel Bar Round Shape DIN JIS Standard
...Cold Rolled Stainless Steel Bar Round Shape DIN JIS Standard SUS304 316 303 300 Series Stainless Steel Round Bar/Rod/Shaft Stainless steel is an alloy of Iron with a minimum of 10.5% Chromium. Chromium produces a thin layer of oxide on the surface of the steel......
Shandong Gangshun Metal Products Co., Ltd.
|
1.2714 Die And Tool Steel DIN1.2714 Hot Work Tool Steel Forged Round Bar
1.2714 Die And Tool Steel DIN1.2714 Hot Work Tool Steel Forged Round Bar 1.2714 Tool And Die Steel for hot pressing , Moulds , mandrels , embossing tools 1.2714 Due to its characteristics of high wear resistance, extra toughness, and high hardness which is......
Zhangjiagang Guangda Special Material Co., Ltd.
|
OD 12.7-3000mm Cold Rolled Round Steel Bar Solid Hot Rolled Carbon Steel Bar 20# 45#
...Cold Rolled Round Steel Bar Solid Hot Rolled Carbon Steel Bar 20# 45# Round Bar Product Specification: Round steel is a long strip of steel with a solid cross section. Its specifications are expressed in millimeters in diameter. They are divided into three types: hot-rolled, forged, and cold-drawn. The hot-rolled specifications are 5.5-250 mm. They are often used as steel bars, bolts, and various Mechanical parts, round steel...
Jiangsu Pucheng Metal Products Co., Ltd.
|